JMM RAW, FINISHED & DISTRIBUTED TESTING

RAW, FINISHED & DISTRIBUTED ANALYSIS

Raw Water: Well water before any treatment
Finished Water: Product water immediately down stream of the RO process
Distributed Water: Product water after it has left our 1.0 MG storage tank.

January 2012

CHEMICAL	WELL WATER RAW	FINISHED WATER QUALITY	DISTRIBUTED WATER QUALITY	MCL
P - Alkalinity as CaCO₃, mg/l	0	0	0	N/A
Total Alkalinity CaCO₃, mg/l	520	52	52	N/A
Bicarbonate as HCO₃, mg/l	634	63	63	N/A
Carbonate as CO₃, mg/l	0	0	0	N/A
Hydroxide as OH, mg/L	0	0	0	N/A
Total Hardness as CaCO₃, mg/l	100	8	6	150*
Calcium Hardness as CaCO_3, mg/l	40	2	2	N/A
Magnesium as CaCO₃, mg/l	60	6	4	N/A
Calcium as Ca, mg/l	16.0	0.8	0.8	60.0*
Color, C.U. (Color Units)	31	0	0	15*
Silica as SiO₂, mg/l	10.5	3.0	1.4	N/A
Conductivity as µS/cm	2,530	305	303	N/A
Iron, Fe mg/l	0.03	0.01	0.02	0.300*
Copper, Cu, mg/l	< 0.070	< 0.070	< 0.070	1.300^
Manganese, Mn mg/l	0.019	0.004	0.000	0.050*
Phosphate as PO₄, mg/l	0.20	0.48	0.45	5.00*
Chloride as Cl₂, mg/l	500	70	60	50.0*
Fluoride, F, mg/l	1.60	1.00	1.00	2.00* 4.00^
Nitrate as NO₃, mg/l	0.0	0.3	0.2	10.00^
Zinc, Zn, mg/l	0.15	0.11	0.04	5.000*
Chlorine (free CL₂), mg/l	0.00	1.28	0.50	0.20@ 4.00^
Lead as Pb, mg/l	< 0.005	< 0.005	< 0.005	0.015^
Corrosiveness	0.23	-2.58	-2.46	N/A
pH	7.93	7.02	7.14	6.5-8.5#
Temperature, ° Celsius	19.8	19.6	18.4	N/A
Turbidity, N.T.U.	0.06	0.03	0.02	1.0^
Total Suspended Solids, mg/l	0	0	0	N/A
Total Dissolved Solids, mg/l	1,260	144	144	500.00*
Sulfate as SO₄, mg/l	0	1	0	250.0*
Sulfide as S, mg/l	0	0	0	N/A

MCL - Maximum Contaminant Level mg/L = parts per million (ppm) N/A - Not Available; No Limit

* Recommended Maximum @ Mandatory Minimum ^ Mandatory Maximum # Mandatory Range

Click Here For An Explanation For Each Of These Chemical Tests

Page last updated January 26, 2012